Archivo del Autor: yoda

November 21, 2023, marks the tenth birthday of our very first CubeSat mission, FUNcube-1 (AO-73).

A very short time after the launch from Yasny in Russia and within a few minutes from deployment, the very first frame of data from the low power transmitter on board, was detected and decoded by ZS1LS in South Africa. He was able to relay the data over the internet from his Dashboard to the Data Warehouse and the numbers, appeared, as if by magic, at the launch party being held at the RSGB National Radio Centre at Bletchley Park.

After a very brief check out, the FUNcube team were able to switch the transmitter to full power, again at the very first attempt, and were quite amazed at the strength of the signal from the 300mW transmitter on 145.935 MHz. The transponder was then switched on and successfully tested, the first contact was between G6LVB and M5AKA who were both operating from the Bletchley Park car park.

The team finished the day with a request to AMSAT-NA for an Oscar number and were delighted to receive the AO73 Oscar 73 designation!

Since then, FUNcube-1, with a launch mass of less than 1kg, has operated continuously with only a very few interruptions. In excess of 53,500 orbits, 1.3 billion miles travelled, 61 million telemetry data packets transmitted, and with more than 10.9 million unique data packets downloaded and stored in the Data Warehouse.

The FUNcube team still receive many requests for Fitter message uploads for school events…please contact us by email to operations@funcube.org.uk giving us at least two weeks notice.

The FUNcube team continue to be very grateful to all the many stations around the world that continue to upload the telemetry that they receive to our Data Warehouse. They really need this data to provide a continuous resource for educational outreach.

After more than 15 years in orbit, Delfi-C3’s mission is about to come to an end. The team predict that re-entry will take place around November 16th 2023.

We would like to request all amateur radio operators / SWL’s / satellite enthusiasts worldwide to listen for Delfi-C3’s telemetry downlink on 145.867 MHz, 1200 baud AX.25 BPSK. We will hand out an award certificate to the person submitting the last Delfi-C3 telemetry frame.

This can be done either through the RASCAL software (updated version coming…), through the SATNOGS network or by sending us decoded telemetry frames with reception time and location via email to Delfi_at_tudelft.nl.

On behalf of the entire Delfi-C3 team, we would like to sincerely thank the worldwide amateur radio / SWL / satellite community for assisting the team by forwarding received telemetry and reception reports.

Back in 2008 we could not imagine the great support received so far and the many first we had, including a successful ground network and flying the first linear transponder in a CubeSat.

We strongly believe that Delfi-C3 has paved the way for many follow-on missions (both amateur and commercial), and has been a great step towards maturing CubeSat technology as well as training the next generation of space engineers. Stay tuned for updates!

On behalf of the team best 73s,

Wouter PA3WEG